Set of three shims to be placed between the piston head and the piston to modify / adjust the angle of engagement between the first tooth of the piston and the first tooth of the sector.
Set of three shims to be placed between the piston head and the piston to modify / adjust the angle of engagement between the first tooth of the piston and the first tooth of the sector.
The insertion of such thickness causes a slight retraction of the piston and decreases the angle of engagement.
This procedure can increase the reliability of replication.
Moving from a standard hook-up angle (like MARUI) to a non-standard one, it is advisable to make the modifications to the piston (elimination of the second tooth and possibly reduction of the third).
If you are a beginner, you should contact technicians with proven experience.
A normal piston head can withstand a maximum thickness.
Technical data:
- internal hole: 5 mm
- external diameter: 18 mm
- thickness: 1 mm
100% MADE IN ITALY
Specific References
Shim to adjust the engagement angle between piston and sector gear, essential for your custom
AOE Piston Head Pad 3mm Retroarms 7198
Set of 20 pieces of steel thickness ST 2 K60 FROM 0.30 mm for gears
Set of 20 pieces of steel thickness ST 2 K60 FROM 0.20 mm for gears
Set of 20 pieces of steel thickness ST 2 K60 FROM 0.10 mm for gears
FPS Reinforced AEG Tappet Plate V 2 (ASV2)
This product has been designed to be compatible with most Gear Box V2s on the market today.
FPS Lightweight full metal rack 14 teeth Fps piston (PM01)
Top Max ERGAL cylinder head with PAD BLACK (TCMMV2B)
Cylinder head made in CNC ERGAL with anti-vibration design, QUAD-RING of air seal for the cylinder, elongated spout for perfect air tightness and PAD in interchangeable rubber with 5 degrees of hardness to adapt to springs and R.O.F. diversified.
The Tappet Plate is one of the most important parts of the gearbox responsible for the timing and correct BB feed. Such a crucial element needs to combine two qualities – flexibility and endurance. The shape of the fin has been designed to ensure the best nozzle opening times and minimize friction against the sector gear. While testing, we did not notice any signs of wear, even after 30,000 cycles. Especially for the most demanding users, we've marked where you need to shorten the fin in order for it to work properly with DSG gears. We've also looked at the tolerances between the Tappet Plate and the nozzle. For additional nozzle stabilization we've designed tighter tolerances. Increase the performance of your replica with the GATE Tappet Plate.
Replacement Bolt handle return spring for M4 M16 series, who hasn't happened to pull too hard and stretch or break the lever spring of your airsoft replica? Airsoft pro has the solution to the problem