The Fenix PD32 V2.0 Flashlight is the perfect all-purpose flashlight, made for a variety of tasks. Featuring a multi-function tail switch that allows you to quickly choose between 3 brightness levels, for a maximum 1200 lumens and a beam distance of 1295ft (about 395m), plus strobe.
The Fenix PD32 V2.0 Flashlight is the perfect all-purpose flashlight, made for a variety of tasks. Featuring a multi-function tail switch that allows you to quickly choose between 3 brightness levels, for a maximum 1200 lumens and a beam distance of 1295ft, plus strobe. Tap and hold the tail switch for a fast momentary on. At just over 5” long, this flashlight is a great everyday carry size. Perfect for hiking, camping and outdoor activities, the Fenix PD32 V2.0 Flashlight is powerful enough for law enforcement and search/rescue.
PD32 V2.0 Size:
Length: 5.09” (129.4mm)
Head: 1.0” (25.4mm)
Body: 0.93” (23.6mm)
PD32 V2.0 Weight:
2.89 oz. (82g) excluding battery
PD32 V2.0 Battery:
One 18650 li-ion battery or two CR123A batteries (no batteries included with your purchase)
Included:
Body clip, lanyard, holster, spare 0-ring
On/off of the Fenix PD32 V2.0 Flashlight
Tap the tail switch to momentarily turn on the light.
Press the tail switch to constantly turn on the light, press again to turn off the light.
Output Selection
With the light switched on, tap the tail switch to cycle through Low→Med→High.
Strobe
In any state, press and hold the tail switch for 0.5 seconds to enter strobe.
Tap the tail switch to turn back to previously used mode.
Intelligent Memory Circuit
The light memorizes the last selected output excluding strobe. When turned on again the previously used output of general mode will be recalled.
Intelligent Overheat Protection
The light will accumulate a lot of heat when used on High output level for extended periods. When the light reaches a temperature of 60°C or above, the light will automatically step down a few lumens to reduce the temperature. When the temperature drops below 60°C, it will then allow the user for the reselection of High mode.
Low-voltage Warning
When the voltage level drops below the preset level, the flashlight is programmed to downshift to a lower brightness level until Low output is reached. When this happens in Low output mode, the battery level indicator blinks 3 times every 5 minutes to remind you to timely recharge or replace the battery.
Note: This only works with Fenix ARB-L18 18650 Li-ion battery.