Technopolymer loaded delayers expressly studied for fast gusts in collaboration with Nikk Sakk.Extreme.Aisoftcustom.
Technopolymer loaded delayers expressly studied for fast gusts in collaboration with Nikk Sakk.Extreme.Aisoftcustom.
The main features of these products are:
- postpone the opening of the pusher "to a maximum" compared to a standard delayer "to avoid power losses during the burst
- delaying the pusher closing phase, at the same time increasing the positioning speed of the pellet
- ensure maximum opening of the spreader rod as in the case of our DL01
The adoption of these delayers necessarily involves the modification of the "fin" of the pusher rod.
Our team recommends assembly only by expert technical staff.
SET COMPOSED OF THREE PIECES
100% COMPATIBLE MARUI
100% MADE IN ITALY
Specific References
Technopolymer loaded delayers expressly studied for fast gusts in collaboration with Nikk Sakk.Extreme.Aisoftcustom.
Delayers in loaded technopolymer specifically designed to solve draft problems due to wear of the nozzle rod or to imperfect compatibility between aftermarket spare parts installed on your replica.
The delayer for UMAREX/VFC MP7 AEG gen1/gen2 platform by TopMax Elaborazioni is made of molded and shaped techno-polymer and is designed to delay the opening of the pusher shaft. We recommend gluing the delayer to the sector gear with Loctite Attak Gel or similar. In order to better manage the shooting cycle, and therefore the use of the delayer, excellent mechanical knowledge is required, also in relation to the adaptation of the pusher shaft.
The TPNS POM Bearing Piston Head is designed to enhance the performance of airsoft replicas with a rate of fire exceeding 30 BBs per second. This innovative component, developed in collaboration with Nico Saccocci from NikkSakk.Extreme.Airsoftcustom, is ideal for those seeking high silencious operation and reduced mechanical stress in their replica.
The RetroArms piston for airsoft replicas is designed to withstand extreme conditions and ensure reliable performance even with heavy springs. Featuring reinforced steel teeth, it offers superior wear resistance and exceptional durability
Set of three shims to be placed between the piston head and the piston to modify / adjust the angle of engagement between the first tooth of the piston and the first tooth of the sector.
