DMAC Cylinder X-Air Type D
Cylinder for barrel from 100mm to 180mm.
Made of Ergal 7075 from the full with numerical control machinery, it guarantees excellent smoothness even without lubricants.
Ergal air seal nozzle for Masada A&K series with sealing oring, obtained from solid and machined with CNC machinery.
Specially designed to be compatible with most Masada A&K replica brands on the market.
Thanks to its shape, it is possible to obtain a better airtightness between the ball pusher and the hop up rubber, translating in greater consistency to the crony and consequently a tighter rosé.
DMAC Cylinder X-Air Type C
Cylinder for barrel from 360mm up
Made of Ergal 7075 from the full with numerical control machinery, it guarantees excellent smoothness even without lubricants.
magpul original extractor for 5.56 magazines Dark Earth
price for 1 pcs
DMAC Piston Head X-Flow EVO® in Ertalon + mos2
The innovative X-Flow EVO Head Piston in Ertalon+mos2 (polymer) made with the CNC machining, has been designed and calibrated to the thousandth.
The innovative X-Flow EVO Head Piston in Ertalon+mos2 (polymer) made with the CNC machining, has been designed and calibrated to the thousandth.
The innovative Delirio Head Piston in Ertalon+mos2 (polymer) made with the CNC machining, has been designed and calibrated to the thousandth. Its particular concave shape without the presence of the front anti vacuum holes, ensures high efficiency during the compression phase, guaranteeing a perfect concentration of the air flow so as to be pushed and routed directly into the nozzle of the cylinder head, avoiding the formation of air vortices
EN: Flux-Cut® head cylinder for gear of the 2nd and 3rd version. Made with the CNC machining, it has a larger cone diameter designed to fit perfectly to the piston one, with a much more pronounced angle.
Born from the collaboration with a company for 30 years leader in the D90 spring it is made of steel industry Pre-hardened variable pitch.
The abbreviation stands 100 the speed in m / s reached by bullets from 0,20gr.
Born from the collaboration with a company for 30 years leader in the D100 spring it is made of steel industry Pre-hardened variable pitch.
The abbreviation stands 100 the speed in m / s reached by bullets from 0,20gr.
EN: Flux-Cut® head cylinder for gear of the 2nd and 3nd version. Made with the CNC machining, it has a larger cone diameter designed to fit perfectly to the piston one, with a much more pronounced angle. It presents only one o-ring seal but larger. In addition two abutment o-ring have been applied, in front and rear position, designed to ensure that the surface of impact between the two heads is low, and its strength is much more softer, also the particular shape of holes are designed to use the front O-ring part and soften up the impact and extend the life of the gearbox.
EN: Flux-Cut® head cylinder for gear of the 2nd version. Made with the CNC machining, it has a larger cone diameter designed to fit perfectly to the piston one, with a much more pronounced angle.
Born from the collaboration with a company for 30 years leader in the D105 spring it is made of steel industry Pre-hardened variable pitch.
The abbreviation stands 105 the speed in m / s reached by bullets from 0,20gr.